Specifications
- Item: Meteor75 Pro P1 Brushless Whoop Quadcopter
- Wheelbase: 80.8mm
- Motors: 1102 22000KV Motor
- Frame: Meteor75 Pro Brushless Whoop Frame (Transparent Gray)
- Propellers: Gemfan 45mm 3-Blade Propellers
- Canopy: Micro Canopy for HD Camera
- FC: Matrix 1S 3IN1 HD FC
- Camera: P1 Camera
- Receiver: Onboard Serial ELRS 2.4G
- VTX: P1 Air Unit
- Recommended Battery: LAVA II 1S 580mAh/680mAh Battery
- Flight time: 5:30
- Weight: 37.5g
P1 Air Unit HD VTX
The Meteor75 Pro P1 features the P1 Air Unit, delivering reliable HD video with 200mW output and over 5km range. Experience smooth, low-latency flight at ~60ms, giving you stable, static‑free video for confident exploration.
Its 1/2.9” CMOS sensor and 170° field of view capture crisp 1080p live footage, enhanced by optimized PID tuning for both cinematic flying and freestyle fun.
Advanced Stability with Matrix 1S 3IN1 HD FC
The Meteor75 Pro P1 features the cutting-edge Matrix 1S 3IN1 HD FC, purpose-built for 1S HD whoops. Designed exclusively for digital FPV, this FC combines a flight controller, ESC, and ELRS 2.4G RX into a compact, lightweight unit, eliminating analog OSD for seamless performance. With a newly developed BEC and ESC, the Matrix 1S 3IN1 HD FC ensures stable digital image transmission, even in challenging conditions, giving pilots the confidence to push their flights further. Experience effortless setup, reliable power, and unmatched stability in every flight.
Power System
The Meteor75 Pro P1 is powered by 1102 | 22000KV motors, GF 45mm 3-Blade props, enhanced continuous 12A ESC, and the high-performance LAVA II 1S 580mAh/680mAh battery, delivering a seamless balance of power and efficiency. This advanced setup effortlessly handles the size and weight of the P1 Air Unit while providing an impressive 5:30 minutes flight time. With this power system, you can confidently achieve smooth, high-definition aerial footage on every flight.
Tailored HD Canopy
Designed specifically for HD whoops, the micro canopy is injection‑molded for durability, impact resistance, and heat tolerance—keeping your Meteor75 Pro P1 protected. The adjustable camera angle (0°–45°) lets you frame the perfect shot, while optional decorative panels give your whoop a custom, spacecraft‑inspired look.
Bind & Fly Ready
The Meteor75 Pro P1 is fully compatible with the VR04 HD goggles—just bind and fly. No setup, no fuss. Jump straight into an immersive HD FPV experience right out of the box.
Know More About ArtLynk Protocol
The ArtLynk protocol is a low-latency, long-range communication protocol for drones, offering superior stability and range over traditional analog VTX. ArtLynk protocol enables real-time HD video at about 60ms latency from glass to glass, which is crucial for smooth flight control and high-quality FPV (First Person View). Here are the key features you may want to know.
- Artosyn Inside & KAP Supported: ArtLynk protocol uses the Artosyn’s latest AR803X chipset, with core technology support provided by KAP (KAP company provides core technology support or product solution to all FPV companies and ensures compatibility for various FPV products using Artosyn chipsets).
- Collaborative and Open Community: ArtLynk protocol is a collaborative FPV ecosystem not belonging to ONLY one company. Many FPV enterprises and teams would design and produce their own products based on the ArtLynk protocol, ensuring broad compatibility and fostering community.
The ArtLynk protocol supports VR04 HD goggles, Aquila20 HD, Meteor75 Pro P1 whoops, and more—letting you customize your own build or simply bind and fly.
Recommended Parts
- Battery: LAVA II 1S 580mAh/680mAh Battery
- FC: Matrix 1S 3IN1 HD FC
- Motor: 1102 | 22000KV Brushless Motor
- Props: Gemfan 45mm 3-Blade Propellers (1.5mm Shaft 4PCS)
- VTX: P1 Air Unit
- Frame: Meteor75 Pro Brushless Whoop Frame
- Goggles: VR04 HD FPV Goggles
- Radio Transmitter: LiteRadio 3 Pro, LiteRadio 3, LiteRadio 2 SE
- Canopy: Micro Canopy for HD Camera
File
- FC firmware and CLI dump file
Package
Meteor75 Pro P1 Brushless Whoop Quadcopter
- 1 * Meteor75 Pro P1 Brushless Whoop Quadcopter
- 4 * GF 45mm 3-Blade Propellers
- 1 * Type-C to SH1.0 Adapter
- 1 * SH1.0-4Pin Adapter Cable
- 4 * M1.4*4 Phillips Flat Head Screws
- 3 * Decorative Parts
- 1 * User Manual for P1 Air Unit
Specifications
- Size: 168.8×182.1×98.5mm
- Weight: 400g±10g (batteries excluded)
- Display Screen: LCD
- Screen Size: 4.5 inch
- Screen Resolution: 1920*1080
- Transmission Range: >400m
- Bitrate: Max 25Mbps
- Batteries: 2600mAh (VR04 HD), 3800mAh (VR04 HD Pro)
- Runtime: About 3 hours (VR04 HD) / 4 hours (VR04 HD Pro) in normal mode
- Charging Port: Type-C port on the headband battery holder
- Card Slot: MicroSD card (Not included), Supports FAT32 system, maximum 1T storage
- Recording Resolution: 1080P@60fps
Diagram
VR04 HD:
VR04 HD Pro:
Total Immersion & Comfort
The VR04 HD FPV Goggles are designed for extended-wear comfort, featuring a glasses-friendly interior that accommodates most eyewear. Premium PU face padding ensures a secure, comfortable fit, while a soft silicone nose bridge seals out external light to deliver a fully immersive flight experience.
Power Flexibility
The VR04 HD is powered by two 2600mAh batteries for up to 3 hours of use, while the VR04 HD Pro features two 3800mAh batteries for up to 4 hours of use on a single charge. For added flexibility, both models can also be powered directly by any 2‑6S whoop battery—ideal for extended sessions or quick-swap setups.
Record & Replay
The VR04 HD goggles deliver stunning clarity with a 1920×1080 screen resolution, bringing your flights to life in vivid detail. It also supports smooth 1080P@60fps recording—simply press the record button to capture HD footage directly to a microSD card with support for up to 1TB of storage. Relive your most thrilling moments anytime, in crisp high definition, with no extra gear required.
How to Record A Video?
- Insert a microSD card (maximum 1TB) into the card slot;
- Short press the record button to start recording, a red dot appears;
- To stop the recording, short press the button again.
VR04 HD Pro: Live Feed Output
The VR04 HD Pro features a Type‑C port that supports live video streaming via DisplayPort (DP) protocol. So you can share your live flight view with external displays, capture footage on larger screens, or let spectators experience the action alongside you.
VR04 vs. VR04 HD vs. VR04 HD Pro
| VR04 | VR04 HD | VR04 HD Pro | |
| Screen Size | 4.3 inch | 4.5 inch | |
| Screen Resolution | 800*480 | 1920*1080 | |
| Recording Resolution | 480P@30fps | 1080P@60fps | |
| Card Slot | microSD Card, (maximum 64G) | microSD Card (maximum 1TB) | |
| Antenna | Left single antenna | Dual antenna | Replaceable dual antennas |
| Type-C Port | Charging | Read a microSD card | Read a microSD card/live feed output via a Type-C with DP support |
| Power Supply | Built-in 2000mAh 1S batteries | 2 * 18650 2600mAh batteries | 2 * 18650 3800mAh batteries |
| Runtime | 2H | 3H | 4H |
| Fan | – | Cooling fan (automatic) | |
| Weight | 425g±10g (built-in battery) | 400±10g (batteries excluded) | |
| DC Port | Extended 2‑6S power supply | ||
Wide Compatibility
The VR04 HD goggles are compatible with the P1 Air Unit for custom builds, and are bind-and-fly ready with whoops like the Meteor75 Pro P1—so whether you’re building or flying straight out of the box, an immersive HD flight is just a connection away.
Know More About ArtLynk Protocol
The ArtLynk protocol is a low-latency, long-range communication protocol for drones, offering superior stability and range over traditional analog VTX. ArtLynk protocol enables real-time HD video at about 60ms latency from glass to glass, which is crucial for smooth flight control and high-quality FPV (First Person View). Here are the key features you may want to know.
- Artosyn Inside & KAP Supported: ArtLynk protocol uses the Artosyn’s latest AR803X chipset, with core technology support provided by KAP (KAP company provides core technology support or product solution to all FPV companies and ensures compatibility for various FPV products using Artosyn chipsets).
- Collaborative and Open Community: ArtLynk protocol is a collaborative FPV ecosystem not belonging to ONLY one company. Many FPV enterprises and teams would design and produce their own products based on the ArtLynk protocol, ensuring broad compatibility and fostering community.
The ArtLynk protocol supports VR04 HD goggles, Aquila20 HD, Meteor75 Pro P1 whoops, and more—letting you customize your own build or simply bind and fly.
File
- User Manual for VR04 HD FPV Goggles
- Firmware for VR04 HD
- Firmware for VR04 HD Pro
Recommended Parts
- Quadcopter: Meteor75 Pro P1, Aquila20 HD FPV Kit
- VTX: P1 Air Unit
Package
- 1 * VR04 HD FPV Goggles
- 1 * Adjustable Headband
- 2 * 18650 2600mAh Battery
- 1 * User Manual
